Used Lab Equipment

Description:

An FS4700 series fan box consists of a motorized impeller installed in a housing with a variable speed controller. The housing is designed to fit over a HEPA filter on the inlet side and is equipped on the discharge side with a single outlet.

VWR 1601 Horizontal Air Flow Cleanroom Oven

Specifictions:

• Chamber Dimensions: 16 x 19 x 19
• Capacity: 3.7 cu ft
• Temperature Range: 40° to 200°C
• 2 shelves

2 ft Purifier Vertical Clean Bench

Specifications:

• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Disposable prefilter
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions
• Two utility ports with iris openings and plugs
• ETL Listing (115 volt, 60 Hz models)
• One year warranty on parts and service

Features:

• BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
• Blue and red laser
• Two light scatter detectors
• Optical filters such as FITC, PE, PerCP and APC
• A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
• Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
• Compact system and portable weight (13.6 Kg)
• Intuitive interface of the software
• Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)

Features:

• BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
• Blue and red laser
• Two light scatter detectors
• Optical filters such as FITC, PE, PerCP and APC
• A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
• Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
• Compact system and portable weight (13.6 Kg)
• Intuitive interface of the software
• Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 31 1/2 ’’ x 24 2/3 ’’x 45 3/4 ’’ / 53’’
• Internal Dimensions (W x D x H): 30 1/8 ’’ x 21 1/2 ’ x 34’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 39 3/8 ’’x 24 3/4 ’’x 45 3/4 ’’/ 53’’
• Internal Dimensions: (W x D x H): 38’’x 21 1/2 ’’x 34’'
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 50 1/4 ’’x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 48 7/8 ’’x 26 1/4 ’’x 41”
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 3
• Processed Air Flow: 1P: 768 m3 /h, 1P1C: 492 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 191 W
• Amperage absorbed: 0.72 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 71’’ x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 69 1/2 ’’x 26 1/4 ’’x  41’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 4
• Processed Air Flow 1P: 1024 m3/h, 1P1C: 656 m3/h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 261 W
• Amperage absorbed: 0.98 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Description:

These cost-effective vertical laminar flow and horizontal laminar flow workstations feature the Clean-Ceil fan filter module, which utilizes a HEPA filter that is 99.99% efficient for all particles >=0.3µm. The workstations may be used as either benchtop or console units. They incorporate a modular design approach that allows the user to customize a workstation by choosing the optional accessories necessary to meet individual requirements. The workstations come complete with aluminum support frame, clear Plexiglas side panels, 40% efficient ASHRAE-rated prefilter, white plastic laminate back panel (vertical model only, filter is on top), or clear Plexiglas top panel (horizontal model only, filter is on back).

Specifications:

• Dimensions (D x H x W): 21” x 22” x 46”
• Electrical: 115 V, 60 Hz
• Air velocity: 90 ±20 fpm

Features:

• The Bioshperix is a completely closed isolotar system with incubators that is capable to producing an ISO 5 environment.
• The complete incubator system has 4 modules each with a length of 57 ¼” by 30 5/8” for a total length of 332.37” and depth of 119.47”.
• The systems also includes 2, 36” by 24” Laminar flow hoods at each end of the Isolator for introducing materials intop the closed environment.
• Each module is spearated from each other by means of a buffer box.
• One module of the isolator has 2 enclosed incubators capable fo growing and processing cells. Each incubator has outside dimensions of 21.25” W × 33”D × 50.5” H.
• The incubator system also includes a leak testing panel to test for leaks in the system to demostrate compliance with FDA requirements.
• The unit also has 2 chillers to cool the chambers to 4°C. Two separate set of chillers are included one to cool the working surface and other to cool the enviromnet if so desired.

Descriptions:

The Cogent M1 system is an easy-to-use bench-top TFF system that is ideally suited for process development, scaling studies, as well as clinical trials and small-scale production. An innovative and intelligent design, the system enables an extremely low hold-up volume for maximum volume concentration and optimal product recovery. Equipped with a 10-liter tank with embedded balance, the Cogent M1 system can also run in fed-batch or diafiltration mode using an optional transfer pump, which enables the system to process up to 100 liters or more based on product and membrane filter characteristics.

Specifications:

• Filtration Area: 0.1 sq. m to 1.14 sq. m
• Minimum Working Volume: 300 mL at 20% feed pump speed
• Starting Volume: Tank volume of 10 liters
• Hold-up Volume: < 10 mL (excluding cassette)
• Process Temperature Range: 4°C to 50°C (39°F to 122°F)
• Maximum Feed Flow Rate: 4.5 L/min at 5 bar g (72.5 psi)
• Minimum Feed Flow Rate: 200 mL/min
• Maximum Operating Pressure: 5 bar g (72.5 psi)
• Maximum System Pressure: 6 bar g (86 psi) before pump shut-off
• Optional Transfer Pump Flow Rate: Tubing dependant (0.16 to 2300 mL/mn)

Single Laser Configuration

Includes Computer Loaded with Cytosoft Software

The guava easyCyte flow cytometry systems are cost-effective, easy to use and deliver complete and comprehensive cell analysis- right on your benchtop. The culmination of over a decade of flow cytometry expertise, these instruments consume less sample, generate less waste and are easier to use and maintain than traditional flow cytometers—all while providing the analytical power you need to expand your research horizons.

Features:

• Blue Laser
• Forward and Side Scatter
• Tube Sampling
• Automated 96 Well Micrplate Sampling
• Small Sample Size (<20 μL)
• Minimal waste (<50 mL per day)
• Detectors
  • Green
  • Yellow
  • Red

Fluidics Specifications:

• Flow Cell Dimension: Standard square capillary with ID of 100 µm
• Pump: Positive displacement
• Sheath Fluid: None
• Sample Flow Rate: 7µL/min to 72 µL/min
• Waste Generation: typically <40mL in 8 hours of continuous use
• Dead Volume: 50 µL (for 96-well microplate)
• Sample Requirement: as few as 2,000 cells/test; typically 25,000 – 100,000 cells
• Cell Size: 1-60 µm
• Typical # of Cells/Protocol: 1,000 – 10,000 cells/test

The Millipore Guava EasyCyte HT offers sample handling formats for both tubes and 96-well plates, direct sampling using patented microcapillary system, and a user-friendly, versatile software. EasyCyte instruments are also compatible with many fluorochromes and fluorescent reagents.

Specifications:

• Operating temperature: 16°–35°C (60°–95°F)
• Operating humidity: 10–90% relative humidity (non-condensing)
• Power: 100–240 VAC, 50/60 Hz, 120W
• Dimensions: 21 x 24 x 12 inches
• Weight: 71lb
• Detection: 5 colors including forward scatter
• Laser: blue 488 nm (50mW)
• Flow cell dimension: standard square capillary with ID of 100 µm
• Pump: 7 µL/min to 36 µL/min
• Sample flow rate: positive displacement
• Waste and cleaning vials: 30-mL glass vial with screw top
• Waste generation: typically <40 mL in 8 hours of continuous use
• Dead volume: 50 µL (for 96-well microplate); 75 µL (for 0.5-mL microcentrifuge tubes)
• Sample concentration: final particle concentration of 104 to 5 x 105 particles/ml
• Sample requirement: for accurate results (up to 2.5 x 106 beads/mL for the RapidQuant Assay) as few as 2,000 cells/test; typically 25,000-100,000 cells/test, depending on the assay
• Data management: Output data file formats - (1) binary data storage in FCS 3.0 format; (2) spreadsheet results file in CSV format