Used Lab Equipment

Features:

The 600 pumps is quaternary, low-pressure mixing pumps with a built-in solvent degassing system and an automatic calibration feature.

Specifications:

• Flow rate range: 1 to 5000 μL/min
• Backpressure range: 0 to 600 bar (8702 psi)
• Residual pulsation: < 2 bar Amplitude
• Flow rate accuracy: ±0.5% or 1 μL/min, whichever is greater
• Gradient composition accuracy: ±0.5% absolute
• Gradient resolution: 1% from 0 to 100%
• Firmware version: (November 2010) 23.67 e
• Gradient composition range: 0 to 100% from up to 4 independent feed channels employing 2 of them at the same time
• Delay volume 90 μL (LDA): + 65 μL (static mixer)

Specifications:

• Number of solvents: Up to four: in any combination of two: Al or A2 and Bl or B2
• Solvent storage: Solvents Tray accommodates up to four chromatographic solvents, two Sample Manager wash solvents and one Binary Solvent Manager seal wash solvent
• Solvent conditioning: Vacuum degassing (Six-channel): one channel per solvent, and two channels for Sample Manager wash solvents
• Operating flow rate range: 010 to 2.000 mL/min, in 0.001 mL increments
• Compressibility compensation: Automatic and continuous
• Effective system delay volume: <120 ulL, independent of system backpressure (with standard 50-ilL mixer installed)
• Plunger seal wash: Integral, active, programmable
• Gradient profiles: Eleven gradient curves [including linear, step (2), concave (4), and convex (4)]
• Wet prime: Automatic
• Maximum operating pressure: 15,000 psi up to 1 mL/min, 9,000 psi up to 2 mL/min per pump, not more than 15,000 psi total
• Composition accuracy:
  • ±0.5% absolute (full scale) from 5 to 95% of flow rates
  • from 0.5 to 2.0 mLlmin (Contact Waters for conditions used)
• Composition precision: 0.15% RSO or ±0.04 min SO, whichever is greater, based on retention time
• Flow precision: 0.075% RSO or ±0.02 min SO, six replicates, based on retention time or volumetric measures (0.500 to 2.000 ml/min)
• Flow accuracy: ± 1.0% at 0.5 mL/min with degassed methanol, per Waters AQT/SystemsQT protocol
• Primary wetted materials: 316 stainless steel, UHMWPE, sapphire, ruby, FEP, PTFE, ETFE, diamond-like coating, PEEK and PEEK alloys, titanium alloys
• Unattended operation: Leak sensors, full diagnostic data captured through console software

The Waters ACQUITY UPLC H-Class System delivers the flexibility of quaternary solvent blending with the advanced performance of UPLC® separations. The system's holistic design is targeted for routine analysis and method development use and is perfectly suited for running both HPLC and UPLC applications while still realizing the improved resolution and sensitivity of UPLC separations.

Includes:

• TUV Detector (PDA Detector $1000 additional)

• Sample Manager - FTN

• Column Manager to control up to 4 Columns
• Quaternary Solvent Manager
  • 15,000 psi up to 1.0 mL/min,
  • 9000 psi up to 2.0 mL/min
• Computer Loaded with Empower

Specifications:

• Dwell volume (total system): <400 ~L (includes standard 100 ~L mixer)
• Integrated leak management: Leak sensors, as standard, and safe leak handling
• Quantum synchronization: Injection synchronization between pump and sample manager enhances retention time reproducibility
• Set table flow rate range:
  • 01 0 to 2.000 mLlmin, in 0.001 mL increments (firmware version 1.5x and earlier)
  • 010 to 2.200 mL/min, in 0.001 mL increments (firmware version 1.60)
  • 001 to 2.200 mLlmin in 0.001 mL increments (firmware version 1.65 and later)
• Maximum operating pressure:
  • 15,000 psi up to 1.0 mL/min, 9000 psi up to 2.0 mL/min (firmware version l.5x and earlier)
  • 15,000 psi up to 1.0 mL/min, 7800 psi up to 2.2 mL/min (firmware version 1.6x and later)
• pH range: 2 to 12
• Unattended operation: Leak sensors and safe leak handling, full 96-hour diagnostic data display through console software
• Cycle time: <30s Inject to Inject

The ACQUITY UPLC TUV Detector is a tunable, dual wavelength ultraviolet/visible (UV/Vis) detector that offers optimal linearity, resolution, and sensitivity for UPLC/UV separations.  It features uniquely designed, patented, light-guiding flow cell technology, low-noise performance (6 μAU), and support for data rates up to 80 Hz.  The ACQUITY UPLC TUV Detector, coupled with our innovative ACQUITY UPLC Column chemistries and separations modules, leverages ultra-low dwell volume and low-noise, high-speed detection to bring productivity, sensitivity, and resolution that are unprecedented in HPLC techniques being used in the laboratory today.

Specifications:

• Wavelength range: 190 to 700 nm
• Wavelength accuracy: ±1 nm
• Linearity range: Deviation at 2.5 AU ≤5%, propylparaben, at 257 nm
• Baseline noise:6 x 10^-3 AU, at 230 nm, 10 mm shunt cell, 1.0 second filter time constant
• Drift: ≤5.0 x 10^-4 AU/hour/°C at 230 nm
• Sampling rate: Up to 80 points/s
• Unattended operation: Leak sensors, full diagnostic data captured through console software
• Light source: Prealigned, intelligent technology Deuterium lamp
• Flow cell design: Light-guiding UPLC flow cell with intelligent chip technology
• Path length: 10 mm (analytical flow cell)
• Cell volume: 500 nL (analytical flow cell)
• Pressure limit: 1000 psi (all flow cells)
• Wetted materials: 316 stainless steel, fused silica, Teflon AF, PEEK (analytical flow cell)
• Optical bandwidth: 5 nm

Includes:

• Qty (2) - G1361A Agilent 1100 Series Prep Pumps
• G1315A DAD Diode Array Detector (G1314A VWD Detector also available)
• G2258A Agilent 1100 Prep Dual Loop Autosampler (Manual Injector also an option)
• G1364B AFC Automated Fraction Collector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

G1361 Prep Pump

Features:

• Extended flow rate range
• Without changing pump heads, provides flow rates up to 100 mL/min at 400 bar
• For preparative and analytical applications with low flow rates (0.5 mL/min, upward), provides precise high-pressure binary gradient formation with low delay volume (700 uL)
• Automated seal wash using a peristaltic pump extends seal lifetime
• Pumps stop in response to column blockage or leaks
• Automated electromagnetic purge valve simplifies system setup
• Software provides solvent level control that keeps the pump from running dry

Comes with computer loaded w/ Unicorn Software

The purification of biological therapeutics requires processes which usually employ two technologies used in combination: membrane separations and chromatography. Chromatography offers greater selectivity than membrane separations, and can purify much greater quantities of solution in one operation.

However, membrane separations technologies offer a number of other advantages including the fact that they are a fast and robust process step.

ÄKTAcrossflow covers three main filtration techniques:

• Ultrafiltration of proteins
• Diafiltration of proteins
• Microfiltration of cell and lysate solutions

The system supports both hollow fibers and flat sheet cassettes with sizes suitable for flow rates up to 300 ml/min for flat sheet cassettes and up to 600 ml/ min for hollow fibers.

The main application is method development and scale-up in process development laboratories.

Specifications:

• Main Voltage: 100 to 240 V~ ±10%, 50–60Hz (Auto range)
• Weight: 70 kg
• Recirculation Volume Min.: 25 ml (with 1.7 mm i.d. tubing kit)
• Width: 620 mm
• Application: Well-suited for process development, filter screening, and process optimization at small scale.
• Compliance: The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
• Flow Cell Path Length: 2 mm
• Connections: UNF 5/16"
• Wavelength [Zn Lamp]: 214 nm
• Hold-Up Volume Recirculation Line: < 20 ml (with 1.7 mm i.d. tubing kit, empty reservoir)
• Length: 400 mm
• Operating Pressure Max.:2 bar (75.4 psi)
• Material Compliance: USP Class V
• Height: 650 mm
• Protection Class: IP 20
• Complete Packsize: 1 Piece
• pH Range: 2 - 12
• Mixing Principle: Magnetic stirrer

Features:

• Simple column selection with huge built-in library
• Automatic titration of buffers across a broad pH range
• Quick and easy transfer of methods to production-scale
• UNICORN method wizard High performance purification and characterization
• State-of-the-art computer-controlled pumps, UV/conductance monitors, and fraction collector
• UV-Vis detection of up to three wavelengths simultaneous

Specifications:

• Flow rate: 0.01-100 ml/min
• Operating pressure max.: 10 MPa
• Tubing i.d. (flow path): 0.75 mm
• UV wavelength: 190-700 nm
• Flow cell path length: 2 mm
• pH monitoring: 2–12
• Buffer selection: 11 buffer inlets
• Relative humidity: 10%-95% (non condensing)
• pH Stability: 1-14
• Viscosity: max 5 cP
• Multiple wavelength detection: Yes, up to 3 wavelengths
• Multiple sample injection: Yes, up to 8 samples
• Autosampler injection: Optional
• Automatic buffer preparation: BufferPrep
• Pump type: Piston pump, metering type
• Application: Purification of microgram to gram quantities of protein
• Dimensions (W x H x D): 480 x 610 x 470 mm
• Power Requirements: 100-120/220-240 VAC, 600W

ÄKTAxpress Module

ÄKTA xpress is a chromatography system designed for automated, multistep protein purification of both single and multiple samples.

• Unattended purification: Built-in purification knowledge combines software, hardware, and prepacked columns to eliminate time-consuming manual tasks.
• Highest possible purity: Optimized protocols with up to four steps will deliver tagged proteins of near 100% purity. Built-in cleaning procedures between MAb samples to minimize carry over
• High productivity: Each module can purify up to four proteins. The modular design offers adaptability to meet increased throughput needs.
• Yield : The system is capable of purifying target proteins in yields varying from 1 to 50+ mg.
• Akta Express has a Small footprint: A compact design allows the system to occupy minimal space on the bench or in the cold room.

ÄKTAxpress Module

• Complete Packsize: 1 Piece
• Application: Unattended multistep purification of tagged proteins and antibodies
• Flow Rate: 0.1-65 ml/min
• Operating Pressure Max.: 3 MPa (435 psi)
• Tubing i.d. [Flow Path]: 1 mm
• Single Wavelength Detection: Mercury lamp and 254 and 280 nm filters included. Optional filters for 313, 365, 405, 436 and 546 nm.
• Multiple Wavelength Detection: No
• Flow Cell Path Length: 2 mm
• Multiple Sample Injection: Yes, up to 4 samples
• Autosampler Injection: No
• Automatic Buffer Preparation: No
• Buffer Selection: 10 buffer inlets
• Multi-Step Purification: Yes, up to 4 steps
• Relative Humidity: 20%-95% (non condensing)
• pH Stability Long Term: 2-12
• pH Stability Short Term: 1-14
• Viscosity: max 5 cP
• Width: 250 mm
• Height: 660 nm
• Depth: 600 mm
• Weight: 30 kg
• Voltage: 100-120/220-240 VAC
• Power Consumption: 120 VA
• Protection Class: IP 20
• Pump Type: Piston pump, metering type

Includes Installation and One Year Warranty (Preventative Maintenance at 6 months)

Method Development and Training also Available

Includes:

• AB Sciex API 3200 Mass Spectrometer LC/MS/MS
• Windows 7 Computer loaded w/ Analyst Software 1.5
• Turbo V-Spray ESI
• Vacuum pump
• Shimadzu Prominence 20 UFLC  Shimadzu
• Shimadzu DGU-20A3 Degasser
• (2)Shimadzu LC_20AD Liquid Chromatograph
• Shimadzu CTO Column Oven
• Shimadzu CBM-20A Communication Module
• CTC Autosampler
• Monitor – Mouse – Keyboard
• Manuals

The API 3200 LC/MS/MS system is a fully-integrated triple quadrupole mass spectrometer built using premier technology that combines sensitivity and selectivity with ruggedness and reliability, all in an affordable, compact package

• Innovative Turbo V ion source efficiently ionizes compounds over a wide range of flow rates, virtually eliminating cross-contamination, even with large sample loads
• Patented LINAC collision cell technology delivers superior MS/MS performance allowing faster scan times without compromising sensitivity or mass spectral quality
• Simplifies cross-platform methods transfer
• Gives meaningful results from every experiment

Specifications:

• Detector type: Pulse Counting CEM
• Dynamic Range: 5 orders of magnitude
• Ionization Sources: TurboIonSpray, APCI, DuoSpray, PhotoSpray
• Mass Accuracy / Stability: 0.1 Da over 8 hours and 0.15 Da over 24 hours
• Mass Range: 5-1,700 (Quad); 50-1,700 (LIT)
• Polarity Switching Time: 700 ms
• Scan Speed (Quad): 24,000 Da/sec
• Scan Types: Q1 MS, Q3 MS, Product Ion, Precursor Ion, Neutral Loss or Gain, MRM, EMS, EPI, ER, MS3, TripleTrap

The AB Sciex Triple Quad 4500 LC/MS has built upon the popular Sciex 4000 QQQ Mass Spectrometer platform and made it even better. The Sciex 4500 has been redesigned with intelligence and performance in mind. This lcms brings you the best in quantitative sensitivity and robustness to expand upon the experiments going beyond MRM, and give you substantial improvements in data quality. The quadrupole mass spectrometer uses it’s quantitative and qualitative sensitivity to detect low analyte concentrations, a dynamic range for high to low concentrations, scan speed, and ionization source flow range. This potent lcms is equipped with Linear Ion Trap technology for more reliable quantitation over long runs.
The AB Sciex Triple Quad 4500 LC/MS is an ideal choice for research based labs dealing with regulated bioanalysis, targeted quantitative proteomics, clinical research, screening for contaminants in food or the environment, as well as ADME. The Sciex 4500 is also ideal for drug screen and pain management laboratories. This triple quadrupole mass spectrometer has been designed from the inside out to offer a powerful tool that’s more compact to take up less valuable lab space. The triple quad 4500 is also an ideal choice for UHPLC, with fast precise quantitation and ultra-fast scan speeds. This quadrupole mass spectrometer has short dwell times, as low as 1 ms, and can scan for more compounds in a single experiment than ever before, using the powerful MRM program to automatically optimize your acquisitions.
The AB Sciex Triple Quad 4500 LC/MS use triple quads equipped with linear accelerator trap technology, that delivers up to a 100-fold increase to MS/MS sensitivity, and gives a more accurate detection, quantification and confirmation of compounds. The powerful Sciex lcms lets you acquire a complete MS/MS spectrum for every compound detected and cross references it with a built-in library for confirmation. With the computational power behind this LCMS, you’re able to develop new methods, and better streamline your existing work flow. The AB Sciex Triple Quad 4500 LC/MS also features QJet Ion Guide for better ion containment, AcQurate Pulse counting detector for improved extraction efficiency. Contact us today to learn more about our AB Sciex 4500 Triple Quadrupole LC/MS system.

Includes:

• AB Sciex 4500 LC/MS/MS
• Turbo V Source
• ESI Probe
• MS-TABLE Size 1 Peak Bench
• CTC PAL HTX-XT CTC Autosampler
• Shimadzu Prominence 20ADXR UFLC 
• 5X LC-20ADXR Pumps
• CTO-20AC Column Oven
• DGU-20A5R Degasser
• Solvent Tray
• Sojevac 28 BI Rough Pump
• Windows 7 Computer Loaded with Analyst 1.6 Software 

Features:

This Percival® Scientific Arabidopsis Chamber is specifically designed for facilitating the growth of Arabidopsis plants. Meet all your requirements for proper plant growth by using the chamber. This uniquely designed chamber incorporates two individually controlled environments into one compact footprint, providing you with optimum conditions in a single sustainable system. Easily control the temperature, humidity and CO2 within the chamber and manage air flow in each tier of shelves using the capable IntellusUltra™ controller. Lighting events are programmable as well using the control system.

Specifications:

• Temp Range (with Lights On): 10-44+/-0.7 ºC
• Interior Space (volume): 29.1 ft3
• Work Area: 10.8 ft2
• Maximum Growing Height: 20 in
• Exterior Dimensions: 33.5 in (W) 33.6 in (D) 77.9 in (H)
• Light Intensity (6" from lamp): 250 µmoles/m2/s
• # of Tiers: 2

As a reliable source of ultrapure water, the arium pro series offers a flexible and modular system which, compared to conventional devices, demonstrates excellent added value.

Specifications:

• Water purification method: Adsorption by means of spherical activated carbon, deionization, optional end-position particle and sterile filtration
• Water type: ASTM Type 1 ultrapure water
• Output: 120 l/h
• Water dispensing flow rate:1–2 l/min, adjustable
• Volume-controlled dispensing: 4 2 l/min in 100 ml, 1 l or 5 l steps, depending on the total dispense between 0.1 l and 60 l
• Volume accuracy: 5 3% between 0.25 l and 60 l
• Conductivity: 1 0.055 µS/cm compensated to 25°C
• Resistivity: 1 18.2 MO+cm compensated to 25°C TOC3 < 5 ppb
• Microorganism content: 2 < 1 CFU/1,000 ml
• Particle content: 2 < 1/ml
• Input pressure: 0–6.9 bar, recommended > 2 bar
• Temperature: 2–30 °C
• Specific conductivity: < 100 µS/cm compensated to 25 °C
• TOC: < 50 ppb
• Turbidity: < 1 NTU
• pH value: 4–10

As a reliable source of ultrapure water, the arium pro series offers a flexible and modular system which, compared to conventional devices, demonstrates excellent added value.

Specifications:

• Water purification method: Adsorption by means of spherical activated carbon, deionization, optional end-position particle and sterile filtration
• Water type: ASTM Type 1 ultrapure water
• Output: 120 l/h
• Water dispensing flow rate:1–2 l/min, adjustable
• Volume-controlled dispensing: 4 2 l/min in 100 ml, 1 l or 5 l steps, depending on the total dispense between 0.1 l and 60 l
• Volume accuracy: 5 3% between 0.25 l and 60 l
• Conductivity: 1 0.055 µS/cm compensated to 25°C
• Resistivity: 1 18.2 MO+cm compensated to 25°C TOC3 < 5 ppb
• Microorganism content: 2 < 1 CFU/1,000 ml
• Particle content: 2 < 1/ml
• Input pressure: 0–6.9 bar, recommended > 2 bar
• Temperature: 2–30 °C
• Specific conductivity: < 100 µS/cm compensated to 25 °C
• TOC: < 50 ppb
• Turbidity: < 1 NTU
• pH value: 4–10

Description:

Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products ensuring peace of mind to our customers.

Features:

• Colorful LCD display
• Adjustable Fan Speed allows user to regulate air flow around samples
• Double door with inner glass door allowing full width viewing of samples making for easy cleaning
• Interior Chamber made from 304 stainless steel with a mirror polished finish
• Anti-tilt shelving helps avoid accidents when shelves are moved
• Top centered portal allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Chamber Volume: 5.2 cubic ft (146 L)
• Temperature Range: Ambient + 9°F ~ 176°F (Ambient + 5°C ~ 80°C)
• Temperature Stability: 0.36°F (0.2°C)
• Display: 0.1
• Standard/Max Quantity of Shelves: 2/10
• Max. load per shelf: 20 kg
• Net Weight: 82 kg
• Time: 1~5999 min
• Internal Dimension (W x H x D): 20.5 x 20.9 x 20.9” (520 x 530 x 530 mm)
• External Dimension (W x H x D): 30.9 x 29.3 x 27.0” (785 x 745 x 685 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 600 W

Description:

Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products ensuring peace of mind to our customers.

Features:

• Colorful LCD display
• Adjustable Fan Speed allows user to regulate air flow around samples
• Double door with inner glass door allowing full width viewing of samples making for easy cleaning
• Interior Chamber made from 304 stainless steel with a mirror polished finish
• Anti-tilt shelving helps avoid accidents when shelves are moved
• Top centered portal allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Chamber Volume: 0.8 cubic ft (19 L)
• Temperature Range: Ambient + 9°F ~ 176°F (Ambient + 5°C ~ 80°C)
• Temperature Stability: 0.36°F (0.2°C)
• Display: 0.1
• Standard/Max Quantity of Shelves: 2/5
• Max. load per shelf: 20 kg
• Net Weight: 26 kg
• Time: 1~5999 min
• Internal Dimension (W x H x D): 9.8 x 9.8 x 12.2” (250 x 250 x 310 mm)
• External Dimension (W x H x D): 20.2 x 18.1 x 20.1” (515 x 460 x 510 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 100 W