Used Lab Equipment

Fisher Scientific accumet essential (AE) meters are designed to provide the key functions needed for routine measurements without complicated features and processes. AE150 pH benchtop meters are designed with convenience in mind, offering user-friendly functionality and storage/recall of up to 100 data sets in the non-volatile memory. As a space saver, a swivel electrode holder can be attached to either side of meter for holding electrodes during operation and storage. The Fisher Scientific accumet AE150 pH benchtop meters are capable of measuring pH, mV and temperature and are equipped with a LCD (Liquid Crystal Display) with simultaneous display of pH and temperature measured values or mV and temperature measured values for efficient sample reading and recording.

Specification:

• pH Range: 0.00 to 14.00 pH
• pH Resolution: 0.01 pH
• pH Accuracy: ± 0.01 pH
• mV Range: ± 1999 mV
• mV Resolution: 0.1 mV (± 199.9 mV), 1 mV beyond ± 200 mV
• mV Accuracy: ± 0.2 mV (± 199.9 mV), ± 2 mV beyond ± 200 mV
• mV Offset Adjustment: Up to ±150 mV
• Temperature Range: 0.0 to 100.0 °C
• Temperature Resolution: 0.1 °C
• Temperature Accuracy: ± 0.3 °C
• ATC Temperature Calibration: Offset in 0.1 °C increments; Offset range: ± 5 °C
• Temperature Compensation: Automatic or manual (0 to 100 °C)
• pH Calibration Points: 1 to 5 points with automatic buffer recognition (ABR)

• pH Buffer Calibration Options

• USA : pH 1.68, 4.01, 7.00, 10.01, 12.45
• NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45
• Memory: 100 data sets
• Hold Function: Yes
• Self-diagnostic Messages: Yes
• pH Slope & Offset Display: Yes
• Inputs: BNC, 2.5 mm phono plug, reference pin tip, ground
• Output: Recorder (+/- 2000 mV)
• Power Requirements: AC/DC 9V Adapter (110/220VAC, 50-60Hz)
• Display: Dual line LCD with icons
• Dimensions (meter with electrode holder): 18 x 23 x 6 cm (7.1 x 9.1 x 2.4 in.)
• Weight (meter with electrode holder): 1.25 kg (2.76 lb)
• Operating Ambient Temperature: 5 to 45 °C
• Operating Relative Humidity: 5 to 85%, non-condensing
• Storage Temperature: -20 to 60 °C
• Storage Relative Humidity: 5 to 85%, non-condensing
• Pollution: Degree 2
• Overvoltage: Category II
• Regulatory and Safety: CE

The Decloaking Chamber is a programmable benchtop pressure cooker intended for laboratory use. It is programmed to allow the precise pressurized heating necessary for antigen retrieval and also has the capability to perform at a variety of temperatures ranging from 37 °C to 125 °C. The Decloaking Chamber is an excellent tool for heat-induced epitope-retrieval (HIER) methods. The proper use of heat and pressure in conjunction with the appropriate buffer solutions is of the utmost importance for consistent immunohistochemistry (IHC) staining. The Decloaking Chamber is designed to optimize and standardize antibody staining procedures and has been engineered to pass strict laboratory safety requirements. Temperature, pressure and pH can be monitored and recorded with the Decloaking Chamber to produce consistent staining, which will reduce repeat testing and false negatives.

Specification:

• Dimensions (W x D x H): 31 x 29 x 28
• Pan Capacity: 3.2 liters
• Weight: 3.7 (8.18 lbs)

The DO308 drying oven is ideal for accurate water determination of solid or viscous samples like: Substances that release water only at elevated temperatures such as plastics in powder or granular form; Substances that cause side reactions with Karl Fischer reagent such as oxidizing inorganic salts; Substances that cause problems in the titration vessel due to their consistency such as fibrous or pasty substances; Substances that are poorly soluble or insoluble such as wool, dough, tar or coal.

Specification:

• Temperature range: 40 - 300 °C
• Temperature accuracy: ±5 °C (@300°C)
• Footprint housing: 256 x 180 mm
• Dimensions: 500 x 220 mm
• Voltage (auto selection): 100 … 230 VAC
• Max. power consumption: 450 W
• Height: 390 mm
• Weight: 9.1 kg

Sartorius PB-11 Basic Meter has all the characteristics that today's basic laboratory pH meter is required to meet, such as:  Automatic buffer recognition during calibration, Automatic temperature compensation, display with stability icon next to the result, simultaneous display of measured value and temperature, automatic electrode check and electrode slope display during calibration, and easy operation with symbols to help eliminate handling errors.

Specification:

• Measuring Range

• Voltage in mV: -1800… +1800
• pH: -2… +20
• Temperature in ºC: -5… +105

• Resolution

• Voltage in mV: 0.1
• pH: 0.01
• Temperature in K: 0.1

• Accuracy

• Voltage in mV: ± 0.2
• Housing dimensions in mm: 230 x 120 x 80

The Mini Spray Dryer B-290 is the laboratory equipment of your choice for the quick and gentle drying to powder of liquid end products. The impressive features of the Spray Dryer include its efficient performance with very short set-up times, an effective integrated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. Whether the requirement is the gentle drying of natural product dyestuffs, the isolation of highly effective pharmaceutical active agents, or the micro-encapsulation of aromas – the B-290’s outstanding features greatly extends the number of applications that are possible with a  spray drying process

Includes:

• Buchi B-290 Mini Spray Dryer w/ Glassware (as shown)
• Standard Glassware
• Advanced Cylinder Shield
• New Nozzle Assembly
• Aspirator Recently Cleaned

Specifications:

• Power consumption: max. 2900 W
• Connection voltage: 200-230 V ± 10 %
• Frequency: 50/60 Hz
• Evaporating capacity: 1.0 l/h H2O, higher for organic solvents
• Airflow: max. of 35 m3/h
• Motor control: Frequency converter
• Max. temperature input: 220 °C
• Heating capacity: 2300 W
• Heating control: PT-100, fuzzy logic, control accuracy ± 3 °C
• Interface: Serial port RS-232 for all parameters
• Spray gas: Compressed air or nitrogen / 200 - 800 l/h; 5 - 8 bar
• Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available
• Possible particle diameter range: 1 - 25 μm
• Mean residence time: 1.0 - 1.5 sec.
• Pollution degree: 2
• Installation category: II
• Dimensions (W x H x D): 65 x 110 x 70 cm
• Weight: 46 kg

Description:

The Vankel VK 750D is an external heating circulator for Varian dissolution systems.

Specifications:

• Humidity (non-condensing): Not more than 80% RH
• Voltage Requirements: 115 V / 60 Hz
• Current Requirements: 115 V—15 Amp
• Maximum Flow Rate: 11.36 L/min (3 G/min)
• Temperature Range: +5 to 55 °C
• Dimensions: 7.25 in. x 15.25 in. x 7.75 in.
• Machine Weight: 9 kg (20 lb)

Description:

The Fisher Scientific UV Crosslinker FB-UVXL-1000 is used to activate/accelerate nucleic acid cross-linking with accurate monitoring and control of dosage.

Specifications:

• Electrical Requirements: 120V, 60Hz, 2 Amps
• Dimensions: 19.25" x 9.5" x 11"
• Timer Adjustable: up to 9999 seconds

The BactiZapper™ has an asbestos-free core element that uses infrared heating to produce 815° C (1500°F). It completely sterilizes microorganisms in 5-7 seconds. The BactiZapper uses well-proven technology to provide instant sterilization of platinum inoculating loops, needles, glass tube/pipette mouths and various metal & borosilicate glass instruments, commonly used in microbiology research. The ceramic heating element is safely enclosed in a perforated stainless steel guard chamber, protecting users from accidental contact with the extreme temperatures of the core area. It is extremely compact, convenient and can be used in anaerobic and aerobic chambers.

Specification:

• Max Temperature: 815°C / 1,500°F
• Sterilization Time: 5-7 seconds
• Chamber Diameter: 0.55 in. / 14mm
• Chamber Length: 3.94 in. / 100mm
• External Dimensions (W x D x H): 4 x 6 x 6.5 in. / 10.2 x 15.2 x 16.5 cm
• Electrical Data: 120V, 60Hz / 230V, 50/60Hz
• Weight: 2.9 lbs. / 1.3 kg

The first ever serological pipet controller that also allows users to aliquot with the press of a single button.

Specifications:

• Dimensions: 7.2’’ x 7.0’’ x 2.2’’ (18.3 cm x 17.8 cm x 5.6 cm)
• Weight: 340g
• Volume Capacity: Accepts 1 to 100 mL serological pipets Pipet 

• Mains/ power supply:
  • Input Voltage = 100-240 VAC
  • Frequency = 50-60 Hz
  • Input Current = 190-320 mA
  • Output Voltage = 5V
  • Output Current = 2 A 

• Rechargeable Battery:
  • Type = Lithium-Polymer Voltage = 3.7V
  • Capacity = 1100 mAh
  • Charging Time = ~ 3 hr
  • Number of Dispenses = ~2000 dispenses (with a 25mL pipet)

Specifications:

• 250mm size
• Straight sided

Features:

The iScan system utilizes BeadArray microarray technology for a broad range of DNA analysis applications. Each bead on Illumina arrays is covered with hundreds of thousands of copies of specific oligos that act as the capture sequences in one of our array-based assays.

Specifications:

• Average scan time per sample:  1.25 Minutes
• Average scan time per BeadChip: 30 minutes
• Maximum weekly iScan throughput: 6,048
• Laser Excitation: 532 nm and 658 nm dual-laser excitation
• Pixel Resolution: 0.53 μm
• Air Table Dimensions: 61 cm x 6 cm x 69 cm
• System Dimensions: 52 cm x 45 cm x 66cm

Features:

This compact and constant voltage power supply is designed for gel electrophoresis. It can also be used for Mini-SDS-PAGE and pulse field electrophoresis applications. This power supply has a built in overcurrent detector for maximum safety and two jacks.

Specifications:

• Jacks: 2
• Display: Voltage or Current
• Current: 300mA @ 150-250V; 500mA below 150
• Electrical Requirements: 230V 50Hz
• Dimensions (H x L x W): 6 x 8 x 4.5 in. (15 x 20 x 11cm)